Frequently Asked Questions

    General Lumber FAQs

  • How are design values derived?
    • Design values provide guidance for designers to calculate the performance of a structural system and are assigned to six basic lumber properties. Design values for stiffness, as well as the major strength properties of bending, tension and compression parallel-to-grain, are based on data from destructive testing of samples of commercially-produced structural lumber. Design values for the minor strength properties of shear and compression perpendicular-to-grain are based on published clear-wood properties.

      Design values for structural lumber go through a rigorous approval process. As the rules-writing agency for Southern Pine lumber, the Southern Pine Inspection Bureau (SPIB) is responsible for developing and publishing design values for Southern Pine. All testing and data analysis must be completed in accordance with approved standards. Proposed design values are submitted to the American Lumber Standard Committee (ALSC). Design values are approved by the ALSC Board of Review following a careful review and recommendation from the U.S. Forest Products Laboratory.

      PDFDesign Values from 2014 Appendix A

  • How often are design values changed?
    • Design values have changed multiple times over the years based on available test data. The lumber industry conducts ongoing testing and invests millions of dollars to provide the most accurate and reliable design values for structural lumber. Comprehensive lumber testing is conducted as new technology becomes available or as warranted by changing resource data. The first significant lumber tests began in the 1920s, resulting in design values based on the strength of small clear-wood specimens. The last major change occurred in 1991 when design values for Southern Pine and other North American species were published based on In-Grade testing of full-size samples of commercially produced lumber.

      PDFDesign Values from Book 2014 Tables & Footnotes

  • Should I buy Southern Pine?
    • Yes. Southern Pine lumber remains one of the best construction products on the market today. It is the only lumber species that has been monitored annually since 1994, making it the most tested wood species in America. Southern Pine lumber continues to provide great value with its dependable strength and superior treatability against decay and termites. Southern Pine forests are some of the most productive and sustainable timberlands in the world, capturing large amounts of carbon from the air and storing it in lumber used every day. Southern Pine is grown and manufactured in the U.S. South, further improving local economies, reducing transportation costs and minimizing impacts on the environment.

  • Why isn't the species name on lumber marked with an SPIB grade-mark?
    • Under the provisions of US Department of Commerce Voluntary Product Standard PS-20, if the species is denoted by the agency's mark then the species name does not have to be duplicated. Any lumber marked as SPIB, with no additional species designation, is Southern Pine (also referred to as Southern Yellow Pine and often abbreviated as SYP). Lumber containing the minor species will be labeled as Mixed Southern Pine.

  • Treated Wood FAQs

  • What is SPIB's role in the inspection of treated wood products?
    • SPIB provides third-party audit inspections to Subscriber treated wood manufacturing facilities. These inspections include monitoring of in-plant quality control procedures and representative sampling of treated wood products. Samples are analyzed at the SPIB Chemical Laboratory and results are evaluated according to the American Wood Protection Association (AWPA) Standards M22 & M23. Plants in good standing are licensed to apply the distinctive SPIB Quality Mark to qualified treated wood products.

      For more information on the inspection of treated wood products please contact the SPIB Treated Division.

  • What are the design values for pressure-treated Southern Pine?
    • Reference design values for Southern Pine lumber are tabulated in the Design Values for Wood Construction Supplement of the National Design Specification® (NDS)® published by the American Wood Council. Reference design values for untreated lumber also apply to lumber that is pressure treated by an approved process and preservative. As a result, new design values that became effective June 1, 2013 also apply to visually graded Southern Pine dimension lumber that is pressure-treated.

      Reference design values are based on normal load duration under the moisture service conditions specified; they must be multiplied by applicable adjustment factors to determine adjusted design values. Adjustment factors for untreated lumber also apply to pressure-treated lumber with one exception – in Allowable Stress Design applications allowing an increase with the Load Duration Factor, CD, that factor cannot exceed 1.6 for structural members pressure treated with waterborne preservatives.

      For more information contact treated division.

  • What do the stamps and tags on treated lumber mean?
    • Glued Lumber Grademark

      Gradestamps are generally located 2 to 3” from the end of a piece of white (untreated) lumber. Gradestamps are specific to the Third-Party Agency that provides inspection to the lumber manufacturing mill and includes information on the grade of lumber, moisture content and mill identification.

      When the lumber is subsequently treated, the treating plant usually attaches a plastic tag to the end of the lumber to identify treatment type, intended end use, applicable standards/specifications and the identification of the treating facility.

      For more information on Treated Wood Quality Marks please contact the SPIB Treated Division.

  • Is it normal for my treated lumber to check (split) after it's been exposed to the weather?
    • Checks in treated lumber are defined as a separation of the wood normally occurring across or through the rings of annual growth and usually are the result of seasoning. As the outer surface dries at a faster rate than the inside, the resulting shrinkage creates the separations. When lumber is placed in an environment that would tend to lower the moisture content of the piece, seasoning checks are the outward signs of additional drying. Lumber in an exposed environment will be in a constant state of drying to the equilibrium moisture content of the environment. Continued wetting and swelling, coupled with the subsequent drying and shrinking only exacerbates this condition.

      Checks are a normal condition of all treated wood products. Although an aesthetic issue, checks rarely diminish service life of properly treated lumber products. Maintenance plays a vital role and all exposed treated wood products should be subject to a regimen of stain/sealant applications to help control the amount of moisture that the lumber will absorb. Care should be taken to allow the lumber to dry to the equilibrium moisture content of the environment before applying any type of sealant.

      For more information on weathering effects of Treated Wood please contact the SPIB Treated Division.

  • How can I find producers of specific treated wood products?